Adapter harness, mobile telephone connection 9-5

English

Delen op sociale netwerken

Koppeling delen

Gebruik permanente koppeling om te delen via sociale media

Deel met een vriend

Alstublieft in te loggen voor het versturen van deze document per e-mail!

In uw website insluiten

Kies de startpagina

2. 2 49 42 017 Saab 9-5 Saab 9-5 is prepared for installation of a mobile pho- ne in two ways: Telephone prepared (Tel 0) and Handsfree prepared (Tel 1). The adapter harness works in both cases. 1 Saab Audio System: Press the special tools that are included with the radio into the designa- ted holes. Press until the tools are attached, a click should be heard. Then pull out the radio with the tools. Non Saab Audio System: Remove the storage compartment above the radio. Remove the radio. 2 Remove the ACC or MCC control panel. 3 Plug the adapter cable assembly into the mobile telepfone connector on the fan housing. 4 Run the adapter cable assembly down to the telephone holder. Note (Only applies with Handsfree prepared model, Tel 1.) Before starting to work, check with the telep- hone manufacturer if the telephone uses high or low level for the microphone output. E930A027 5 6

1. Saab 9-5 900 Monteringsanvisning SCdefault MONTERINGSANVISNING · INSTALLATION INSTRUCTIONS MONTAGEANLEITUNG · INSTALLATIONS DE MONTAGE SITdefault Saab 9-5 Adapter harness, mobile telephone connection Accessories Part No. Group Date Instruction Part No. Replaces 400 108 130 9:36-06 May 00 49 42 017 49 42 017 Apr 99 E930A026

3. 49 42 017 3 Saab 9-5 5 Connect respective lead in the adapter harness to the mobile phone connector in the car. For correct installation, see the table below for con- nections in the car connector (10-pin connec- tor), as well as wiring diagram for each respecti- ve telephone. Compare functions for the different connections. Connection in car 6 Remove the overhead console and use the table below to check that the car microphone is connected in accordance with telephone manu- facturer specifications regarding low/high sig- nal. If needed, disconnect the contact housing for the microphone and move the cable connector with pins to the correct place in the housing, see the table below. Microphone 3-pin connector 7 Make sure the telephone connection functions properly. 8 Refit the side panel and glove box. Pin Telephone prepa- red car (Tel 0) Handsfree prepa- red car (Tel 1) 1 12V (+30) Power supply 12V (+30) Power supply 2 12V (+15) Key-con- trolled voltage 12V (+15) Key-con- trolled voltage 3 Microphone ground Microphone ground 4 Ground Ground 5 Telephone Mute Telephone Mute 6 Rheostat Rheostat 7 Not connected Telephone line out- put signal 8 Not connected Telephone line out- put ground 9 Not connected Not used 10 Not connected Microphone high/ low level output Pin Microphone 3-pin connector 1 Microphone input, high 2 Microphone input, low 3 Microphone ground

Weergaven

  • 547 Totale weergaven
  • 451 Websiteweergaven
  • 96 Ingesloten weergaven

Acties

  • 0 Gedeeld op sociale media
  • 0 Vind-ik-leuks
  • 0 Vind-ik-niet-leuks
  • 0 Opmerkingen

Aantal malen gedeeld

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Insluitingen 3

  • 13 www.saabpartners.com
  • 17 saabpartners.com
  • 4 54.154.214.138