Automatic anti-dazzle rear-view mirror 9-3

English

Delen op sociale netwerken

Koppeling delen

Gebruik permanente koppeling om te delen via sociale media

Deel met een vriend

Alstublieft in te loggen voor het versturen van deze document per e-mail!

In uw website insluiten

Kies de startpagina

1. Saab 9-3 CV M04- 9-5 Installation instructions SCdefault MONTERINGSANVISNING · INSTALLATION INSTRUCTIONS MONTAGEANLEITUNG · INSTRUCTIONS DE MONTAGE SITdefault Saab 9-3 CV M04- Automatic anti-dazzle rear-view mirror Accessories Part No. Group Date Instruction Part No. Replaces 12 756 339 12 777 849 12 777 850 12 789 849 12 833 884 32 000 576 9:85-24 Oct 06 12 833 885 12 833 885 Apr 03 F980A250

2. 2 12 833 885 Saab 9-3 CV M04- 1 Remove and disconnect the roof lighting. 2 Remove the mirror base cover panel. 3 Remove the rear-view mirror. 4 Plug in the connector. 5 Run the wiring harness to the left of the rear- view mirror mounting and fit the rear-view mirror. 6 Fit the mirror base cover panel. 7 Connect and fit the roof lighting. 8 Check the function of the mirror and the lamps. 9 Rear-view mirror with compass: Calibrate the compass, see page 3. If necessary, change compass zone, see page 3. 10 Hand over the installation instructions to the customer and bring attention to the user instruc- tions. WARNING Make sure the wiring harness is not pinched. Incorrect fitting can damage the cables and cause short-circuits/fire. F980A251 1,7 2,6 3,5 3,5 1,7 1,7 4

3. 12 833 885 3 Saab 9-3 CV M04- User instructions The rear-view mirror has two sensors, one facing the front and the other facing the rear. When the front-facing sensor detects that it is dark outside, the system will be activated so th at any bright light fall- ing from behind will gradua lly darken the rear-view mirror to reduce the bri ghtness. As the bright light subsides, the mirror will grad ually return to normal. Automatic anti-dazzle can be switched off using the button under the rear-view mirror. For other ques- tions, refer to the Owner's Manual. Calibration/Programming Rear-view mirror with compass: Calibrate the compass by holding the “AUTO” button depressed until “CAL” and a compass point are shown in the compass window. Release th e button. Slowly drive the car in a circle until “CAL” disappears. The com- pass is now calibrated. For other questions, refer to the Owner's Manual. Rear-view mirror with compass: Change the com- pass zone by holding the “AUTO” button depressed until “ZONE” and a compass point are shown in the compass window. Release the button. You can now change the compass zone using the “AUTO” button (see illustration for compa ss zone options). Release the “AUTO” button once the correct compass zone has been selected. Once “ZONE” disappears, the compass zone is stored. For other questions, refer to the Owner's Manual. Rear-view mirror with garage door remote con- trol: For programming, see the Owner's Manual. D980A352 3 3 4 4 5 5 6 6 7 7 8 8 9 9 1 2 10 10 11 11 12 12 13 13 1 4 15

Weergaven

  • 527 Totale weergaven
  • 443 Websiteweergaven
  • 84 Ingesloten weergaven

Acties

  • 0 Gedeeld op sociale media
  • 0 Vind-ik-leuks
  • 0 Vind-ik-niet-leuks
  • 0 Opmerkingen

Aantal malen gedeeld

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Insluitingen 4

  • 9 www.saabpartners.com
  • 7 saabpartners.com
  • 2 52.29.207.161
  • 3 54.154.214.138