Automatic anti-dazzle rearview mirror 1

English

Delen op sociale netwerken

Koppeling delen

Gebruik permanente koppeling om te delen via sociale media

Deel met een vriend

Alstublieft in te loggen voor het versturen van deze document per e-mail!

In uw website insluiten

Kies de startpagina

1. Automatic anti-dazzle rearview mirror 9-5 Installation instructions SCdefault MONTERINGSANVISNING · INSTALLATION INSTRUCTIONS MONTAGEANLEITUNG · INSTRUCTIONS DE MONTAGE SITdefault Automatic anti-dazzle rearview mirror Accessories Part No. Date Instruction Part No. Replaces 12 756 338 12 772 924 12 772 927 12 777 848 12 777 851 12 803 374 12 804 662 32 000 575 Oct 06 32 025 810 32 025 810 Nov 05 F980A142

2. 2 32 025 810 Automatic anti-dazzle rearview mirror 1 Remove the rear, centre and front sections of the roof lighting cover. Tool 82 93 474 is recom- mended. 2 Remove the rearview mirror. 3 Plug in the connector. 4 Run the wiring harness to the left of the rearview mirror mounting and fit the rearview mirror. 5 Fit the centre section of the roof lighting cover. 6 Fit the front section of the roof lighting cover. 7 Fit the rear section of the roof lighting cover. 8 Check the function of the mirror and the lamps. 9 Rearview mirror with compass: Calibrate the compass; see page 3. If necessary, change the compass zone; see page 3. WARNING Make sure the wiring harness is not pinched. Incor- rect fitting can damage the cables and cause short- circuits/fire. F980A143 3 1 7 5 6

3. 32 025 810 3 Automatic anti-dazzle rearview mirror User instructions The rearview mirror has two sensors; one facing the front and the other facing the rear. When the front-fac- ing sensor detects that it is dark outside, the system will be activated so that any bright light falling from behind will gradually darken the rearview mirror to reduce the brightness. As the bright light subsides, the mirror will gradually return to normal. Automatic anti-dazzle can be switched off using the button under the rearview mirror. For other questions, refer to the Owner's Manual. Calibration/Programming Rearview mirror with compass: Calibrate the com- pass by holding the “AUTO” button depressed until “CAL” and a compass point are shown in the compass window. Release the button. Slowly drive the car in a circle until “CAL” disappears. The compass is now cal- ibrated. For other questions, refer to the Owner's Man- ual. Rearview mirror with compass: Change the com- pass zone by holding the “AUTO” button depressed until “ZONE” and a compass point are shown in the compass window. Release the button. You can now change the compass zone using the “AUTO” button (see illustration for compass zone options). Release the “AUTO” button once the correct compass zone has been selected. Once “ZONE” disappears, the compass zone is stored. For other questions, refer to the Owner's Manual. Rearview mirror with garage door remote control: For programming, see the Owner's Manual. D980A352 3 3 4 4 5 5 6 6 7 7 8 8 9 9 1 2 10 10 11 11 12 12 13 13 1 4 15

Weergaven

  • 571 Totale weergaven
  • 463 Websiteweergaven
  • 108 Ingesloten weergaven

Acties

  • 0 Gedeeld op sociale media
  • 0 Vind-ik-leuks
  • 0 Vind-ik-niet-leuks
  • 0 Opmerkingen

Aantal malen gedeeld

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Insluitingen 7

  • 14 www.saabpartners.com
  • 1 saab.aardug.com
  • 5 52.29.207.161
  • 4 saabpartners.com
  • 3 52.29.207.161:8069
  • 1 52.211.236.180
  • 5 54.154.214.138