Cruise Control 9-3


Delen op sociale netwerken

Koppeling delen

Gebruik permanente koppeling om te delen via sociale media

Deel met een vriend

Alstublieft in te loggen voor het versturen van deze document per e-mail!

In uw website insluiten

Kies de startpagina

1. Saab 9-3 M03- 900 Installation instructions SCdefault MONTERINGSANVISNING · INSTALLATION INSTRUCTIONS MONTAGEANLEITUNG · INSTRUCTIONS DE MONTAGE SITdefault Saab 9-3 M03- Cruise Control Accessories Part No. Group Date Instruction Part No. Replaces 12 787 315 9:36-19 May 02 12 799 591 F980A018

2. 2 12 799 591 Saab 9-3 M03- 1 Find the hole on the bottom of the turn signal stalk. Insert a small screwdriver into the hole, press the internal catch upwards while pulling the turn signal stalk outwards. 2 Insert the new turn signal stalk and press it inwards until the catch audibly engages with a click. 3 Connect the diagnostic tool, select car and mod- el year, select “All”, select “Add/Remove”, select the accessory and then “Add”. 4 Test drive the car and check the function of the cruise control as follows: · Move the slide control to the ON position. · Move the control to position SET/+ or SET/- when the car maintains a speed over 40 km/ h (car with petrol engine) or 25 km/h (car with diesel engine) and check that speed is main- tained. · Accelerate without downshifting (car with manual gearbox). When the accelerator ped- al is released, the car should resume the set speed. · Move the control to position SET/+, hold it in this position and check to see if speed increases. Release the control. · Depress the brake pedal and check to see if cruise control disengages. F980A019


  • 1355 Totale weergaven
  • 1178 Websiteweergaven
  • 177 Ingesloten weergaven


  • 0 Gedeeld op sociale media
  • 0 Vind-ik-leuks
  • 0 Vind-ik-niet-leuks
  • 0 Opmerkingen

Aantal malen gedeeld

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Insluitingen 4

  • 16
  • 4
  • 12
  • 3