Decor strip, instrument unit 9-3

English

Delen op sociale netwerken

Koppeling delen

Gebruik permanente koppeling om te delen via sociale media

Deel met een vriend

Alstublieft in te loggen voor het versturen van deze document per e-mail!

In uw website insluiten

Kies de startpagina

3. 12 788 452 3 Saab 9-3 M03- 3 Remove the infotainment system control panel. 4 Remove the SID unit control panel by pressing together the two tabs on the back and then press- ing forward the control panel, starting from the top. 5 Remove the instrument plate (6 or 8 screws). F980A005 3 4 5 5 5 5 5 5 5 5

2. 2 12 788 452 Saab 9-3 M03- 1 Disconnect the negative battery cable. 2 Remove the left and centre air vent in the dash- board by carefully bending in the hooks accessi- ble through the grille. Important Take care to bend the correct hooks. Hooks holding the air outlet together are also visible through the grille. F980A004 2 2 2 2

4. 4 12 788 452 Saab 9-3 M03- 6 Remove the MIU (Main Instrument Unit) (4 screws) and remove the MIU (Main Instrument Unit) electrical connection. 7 Place the MIU (Main Instrument Unit) on a soft and clean surface on a thoroughly clean work- bench. 8 Remove the instrument glass by unscrewing four screws underneath, turning the instrument face up, holding the sides and pressing in the snap fasteners with your fingers. 9 Lift away the instrument glass. 10 Carefully blow clean inside the instrument glass and on the instruments using compressed air. 11 Position the instrument glass on top of the instru- ment unit and press the glass into the clips. Turn the MIU (Main Instrument Unit) over and fit the screws. 12 Connect the MIU (Main Instrument Unit) and fit it. Important Take great care, as the pointers must not be touched. Disturbing them can cause deviation or damage the stepping motors. F980A006 6 6 6 6 6 8 8 8 8 8 8

5. 12 788 452 5 Saab 9-3 M03- 13 Fit the instrument plate. 14 Connect the SID control panel and fit it by posi- tioning the hooks at the bottom and then pressing in the top. 15 Fit the infotainment system control panel. 16 Position and fit the air vents. 17 Connect the negative battery cable. 18 Set the time and date. 19 Synchronise remote control code by inserting the key into the ignition. 20 Activate window lift pinch protection function by operating the side windows up and down twice. An audible confirmation will sound when activa- tion is complete. Important Repeat this procedure with all keys. Otherwise, the remote controls will not function. F980A008 15 14 13 13 13 13 13 13 13 13

1. Saab 9-3 M03- 900 Installation instructions SCdefault MONTERINGSANVISNING · INSTALLATION INSTRUCTIONS MONTAGEANLEITUNG · INSTRUCTIONS DE MONTAGE SITdefault Saab 9-3 M03- Decor strip, instrument unit Accessories Part No. Group Date Instruction Part No. Replaces 12 787 874 12 802 042 9:38-02 Apr 03 12 788 452 12 788 452 Mar 02 F980A003

Weergaven

  • 406 Totale weergaven
  • 341 Websiteweergaven
  • 65 Ingesloten weergaven

Acties

  • 0 Gedeeld op sociale media
  • 0 Vind-ik-leuks
  • 0 Vind-ik-niet-leuks
  • 0 Opmerkingen

Aantal malen gedeeld

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Insluitingen 3

  • 23 www.saabpartners.com
  • 3 52.29.207.161
  • 1 saabpartners.com