Fog Lights

English

Delen op sociale netwerken

Koppeling delen

Gebruik permanente koppeling om te delen via sociale media

Deel met een vriend

Alstublieft in te loggen voor het versturen van deze document per e-mail!

In uw website insluiten

Kies de startpagina

4. 4 32 026 141 Fog lights 3 Remove the temperature sensor. 4 Remove the wiring harness duct and then the wiring harness. F980A494 4 4 3

5. 32 026 141 5 Fog lights 5 Remove the covers. 6 Insert the fog lights into the casing and fit the screws. F980A495 6 6 6 5

6. 6 32 026 141 Fog lights 7 Secure the new wiring harness in the wiring har- ness duct and fit the clips. F980A497 7 7

2. 2 32 026 141 Fog lights 1 Fog light L 2 Fog light R 3 Screw (x6) 4 Wiring harness The following item is ordered separately: Light switch position F980A492 1 4 2 3

3. 32 026 141 3 Fog lights 1 Raise the car. 2 Remove the spoiler shield, unplug the bumper connector and remove it from the holder on the spoiler shield. Cars with headlamp washers: Unhook the hose from the spoiler shield. F980A493 2 2 2 2 2 2 2

7. 32 026 141 7 Fog lights 8 Fit the wiring harness duct. 9 Fit the temperature sensor. 10 Plug in the connectors for the fog lights. WARNING Check that the wiring harness is not pinched. Incorrect fitting can damage the wiring harness and cause a short-circuit/fire. F980A501 8 9 8 10

8. 8 32 026 141 Fog lights 11 Fit the spoiler shield, secure the bumper con- nector and fit it to the holder on the spoiler shield. Cars with headlamp washers: Fit the hose to the spoiler shield. 12 Lower the car. F980A502 11 11 11 11 11 11 11

1. Fog lights +900 Installation instructions SCdefault MONTERINGSANVISNING · INSTALLATION INSTRUCTIONS MONTAGEANLEITUNG · INSTRUCTIONS DE MONTAGE SITdefault Fog lights Accessories Part No. Group Date Instruction Part No. Replaces 32 026 003 9:89-34 Apr 07 32 026 141 F980A491

9. 32 026 141 9 Fog lights 13 Remove the cover from the electrical centre in the dashboard. 14 Remove the light switch position by pressing from behind the panel. 15 Unplug the connector. 16 Plug in the connector to the new light switch position. 17 Press in the light switch position. 18 Fit the cover onto the electrical centre in the dashboard. 19 Connect the diagnostic tool, select car and model year, select “All”, select “Add/Remove”, select the accessory and then “Add”. 20 Adjust the fog lights and check their function in accordance with the car's certification docu- ments. Example: In Europe, in accordance with "Whole Vehicle Type Approval", it must be possible to switch on the fog light irrespective of whether parking lamps, dipped beam or main beam are switched on. In the USA it must not be possible to switch on the fog light in combination with main beam. In addition, there are differing legal requirements in certain countries. In Sweden, for example, it is not permitted to have the fog light switched on in combination with dipped beam. Study the legal requirements in force for the country in question. Note The diagnostic tool will, on some occasions, need to retrieve a security code in TIS. Information on what to do will be displayed on the diagnostic tool display. F980A499 14,17 13,18 15,16

Weergaven

  • 609 Totale weergaven
  • 506 Websiteweergaven
  • 103 Ingesloten weergaven

Acties

  • 0 Gedeeld op sociale media
  • 0 Vind-ik-leuks
  • 0 Vind-ik-niet-leuks
  • 0 Opmerkingen

Aantal malen gedeeld

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Insluitingen 3

  • 33 www.saabpartners.com
  • 1 saab.aardug.com
  • 1 52.29.207.161:8069