Fog lights 9-3

English

Delen op sociale netwerken

Koppeling delen

Gebruik permanente koppeling om te delen via sociale media

Deel met een vriend

Alstublieft in te loggen voor het versturen van deze document per e-mail!

In uw website insluiten

Kies de startpagina

2. 2 12 789 095 Saab 9-3 M03- 1 Fog light L 2 Fog light R 3 Nuts (x4) The following part is also required (ordered separately) Light Switch Position Wiring harness (M06-) F930A248 1 3 2

4. 4 12 789 095 Saab 9-3 M03- 4 Remove the lower grille by bending in the lock- ing tabs. Remove the temperature sensor from the grille. 5 Remove the covers. 6 Insert the fog light into the casing and fit the nuts. 7 Attach the connectors. 8 M06-: Secure the wiring harness with cable ties in the bumper shell. F930A249 4 4 4 5 6 7 8 6 8 4

1. Saab 9-3 M03- +900 Installation instructions SCdefault MONTERINGSANVISNING · INSTALLATION INSTRUCTIONS MONTAGEANLEITUNG · INSTRUCTIONS DE MONTAGE SITdefault Saab 9-3 M03- Fog lights Accessories Part No. Group Date Instruction Part No. Replaces 12 787 092 9:35-05 May 05 12 789 095 12 789 095 May 03 F980A110

6. 6 12 789 095 Saab 9-3 M03- Replacing the bumper shell wiring harness, M06- 1 Remove the existing wiring harness. 2 Route the new wiring harness along the lower edge of the bumper shell. Secure with cable ties in suitable positions. 3 Cars with side marker lights: Plug the connec- tors into the side marker lights. 4 Cars without side marker lights: Secure the connectors with cable ties. F930A392 2 2 2 3 3 4

3. 12 789 095 3 Saab 9-3 M03- 1 Raise the car. 2 Remove the spoiler shield, unplug the bumper connector and remove it from the holder on the spoiler shield. Cars with headlamp washers: Unhook the hose from the spoiler shield. 3 -M05: Cut the cable ties securing the connectors. M06-: Replace the bumper shell wiring harness, see "Replacing the bumper shell wiring harness, M06-" in these installation instructions. F980A112 2 2 2 2 2 3 2 2

5. 12 789 095 5 Saab 9-3 M03- 9 Fit the temperature sensor and the lower grille. Make sure the locking tabs fasten properly. 10 Lift up the spoiler shield, fit the bumper connec- tor into the holder and plug in the connector. Cars with headlamp washers: Hook the hose to the spoiler shield. All: Fit the spoiler shield. 11 Lower the car. 12 Remove the cover on the electrical centre in the dashboard and remove the light switch by pressing from behind the panel. Unplug the connector. 13 Plug in the connector and fit the new light switch. Fit the cover on the dashboard electrical centre. 14 Connect the diagnostic tool, select car and model year, select “All”, select “Add/Remove”, select the accessory and then “Add”. 15 Adjust the fog lights and check their function according to car specifications. Example: In Europe, as per vehicle testing requirements, fog lights may be used if the park- ing lights, dipped or main beams have been switched on. In the USA, fog lights may be used in combination with the main beams. Certain countries maintain divergent legal requirements, for instance in Sweden where it is not permitted to use fog lights in combination with dipped beams. Be acquainted with the cur- rent laws for the country in question. 16 Cars with headlamp washers: Check the func- tion of the headlamp washers. Note The diagnostic tool will on some occasions need to retrieve a security code in TIS. Information on what to do will be displayed on the diagnostic tool display. F980A114 9 10 9 10 10

Weergaven

  • 532 Totale weergaven
  • 436 Websiteweergaven
  • 96 Ingesloten weergaven

Acties

  • 0 Gedeeld op sociale media
  • 0 Vind-ik-leuks
  • 0 Vind-ik-niet-leuks
  • 0 Opmerkingen

Aantal malen gedeeld

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Insluitingen 5

  • 18 www.saabpartners.com
  • 4 52.29.207.161
  • 5 saabpartners.com
  • 1 52.211.236.180
  • 1 54.154.214.138