2. 2 48 33 208 6DDE 1 Loosen the right and left-hand covers underneath the bumper. 2 Detach the pre-wired harness for the fog lights from inside the covers (2-pin connector with red/ black and black cable). 3 Fit the bracket marked RH to the right fog light and the bracket marked LH to the left fog light. 4 Fit the fog lights into the bumper so that the support fixture on the bracket snaps around the edge of the aluminium rail. 5 Screw the bolts into the clip-fasteners on the lower flange and fit the nuts at the top edge. 6 Plug the relevant connectors to the fog lights. 7 Adjust the position of the fog lights so they do not dazzle oncoming traffic. 8 Make sure their on/off function meets with applicable traffic regulations. E930A610 3 4 6 5 5
1. 6DDE 9-5 Monteringsanvisning SCdefault ,167$//$7,21,16758&7,216 SITdefault 6DDE )RJOLJKWV 1 Fog light, left 2 Fog light, right 3 Bolt and washer (x4) 4 Bracket (x2) 5 Nut and washer Accessories Part No. Group Date Instruction Part No. Replaces -XQ 6HS E930A609 4 2 1 5 3 4
Weergaven
-
1160
Totale weergaven
-
1002
Websiteweergaven
-
158
Ingesloten weergaven
Acties
-
0
Gedeeld op sociale media
-
0
Vind-ik-leuks
-
0
Vind-ik-niet-leuks
-
0
Opmerkingen
Aantal malen gedeeld
-
0
Facebook
-
Twitter
-
0
LinkedIn
-
0
Google+
Insluitingen
4
-
11
www.saabpartners.com
-
4
52.29.207.161
-
9
saabpartners.com
-
5
54.154.214.138