Fog lights 9-5

English

Delen op sociale netwerken

Koppeling delen

Gebruik permanente koppeling om te delen via sociale media

Deel met een vriend

Alstublieft in te loggen voor het versturen van deze document per e-mail!

In uw website insluiten

Kies de startpagina

3. 32 025 632 3 Saab 9-5 M06- 11 Remove the wiring harness to the outside tem- perature sensor. 12 Remove the cover for the fog lights. E930A381 12 11

2. 2 32 025 632 Saab 9-5 M06- 1 Raise the car. 2 Remove the front spoiler shield. 3 Lower the car to a suitable working height. 4 Remove the bumper shell screws at the wing liner on both sides. 5 Detach the shell from the side bracket on the left-hand side. Undo the catch using a small screwdriver. 6 Cars with headlamp washers: Detach the shell from the side bracket on the left-hand side. Place a collection container under the car. Remove the hose to the headlamp washers. Plug the hole to the washer fluid reservoir connection. 7 Detach the shell from the side bracket on the right-hand side. Undo the catch using a small screwdriver. 8 Unplug the 6-pin connector. 9 Remove the bumper shell's upper clips and screws. 10 Get help from an assistant to lift off the bumper shell. E930A380 10 7 8 4 4 2 2 6 2 2 2 5 9 9

4. 4 32 025 632 Saab 9-5 M06- 13 Fit the clip nuts for the screws on the lamp mountings in the bumper shell. 14 Fit the fog lights. 15 Position the kit's wiring harness along the bumper starting at the left-hand fog light. 16 Connect the fog lights and the outside tempera- ture sensor. Fit the wiring harness in the existing clips along the lower edge of the bumper shell. WARNING The wiring harness must be routed and secured so that it cannot become trapped or chafe against anything when refitting dismantled parts. Incorrect routing could cause damage to the wiring harness and short circuit/fire. E930A382 14 13 16 13 15

5. 32 025 632 5 Saab 9-5 M06- 17 Get help from an assistant to lift on the bumper shell. Make sure that the shell secures in the bracket. 18 Fit the bumper shell's upper clips and screws. 19 Plug in the 6-pin connector in the wheel housing on the right-hand side. Fit the wiring harness in the existing clips. 20 Press the shell backward and press the shell securely into the bracket. 21 Fit the wing liner's screws in the right-hand wheel housing. 22 Cars with headlamp washers: Remove the plug and connect the hose's snap-on coupling to the washer fluid reservoir. 23 Press the shell backward and press the shell securely into the bracket. 24 Fit the wing liner's screws on the left-hand side. 25 Raise the car. 26 Fit the front spoiler shield. 27 Lower the car. 28 Adjust the light pattern of the fog lights, making sure they will not dazzle oncoming traffic. 29 Ensure that the on/off function complies with the legislation in force. WARNING Check that the wiring harness is not pinched. Incorrect fitting can damage the wiring harness and cause a short-circuit/fire. E930A383 17 26 26 24 22 18 18 26 26 26 19 21 21 21

1. Saab 9-5 M06- 9-5 Installation instructions SCdefault MONTERINGSANVISNING · INSTALLATION INSTRUCTIONS MONTAGEANLEITUNG · INSTRUCTIONS DE MONTAGE SITdefault Saab 9-5 M06- Fog lights 1 Fog light, left 2 Fog light, right 3 Screw (x6) 4 Clip nut (x6) 5 Wiring harness Accessories Part No. Group Date Instruction Part No. Replaces 32 025 631 9:35-06 Aug 05 32 025 632 E930A379 4 2 3 1 5

Weergaven

  • 491 Totale weergaven
  • 424 Websiteweergaven
  • 67 Ingesloten weergaven

Acties

  • 0 Gedeeld op sociale media
  • 0 Vind-ik-leuks
  • 0 Vind-ik-niet-leuks
  • 0 Opmerkingen

Aantal malen gedeeld

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Insluitingen 4

  • 4 www.saabpartners.com
  • 3 52.29.207.161
  • 2 saabpartners.com
  • 5 54.154.214.138