Front spoiler 9-3 1

English

Delen op sociale netwerken

Koppeling delen

Gebruik permanente koppeling om te delen via sociale media

Deel met een vriend

Alstublieft in te loggen voor het versturen van deze document per e-mail!

In uw website insluiten

Kies de startpagina

4. 4 12 801 970 Saab 9-3 M03- 7 Fit the clip nuts to the spoiler. 8 Lift up the spoiler and fit the wiring harness fasteners to the holes in the spoiler. 9 Insert the guides on the spoiler into the bumper and press home the spoiler's catches, starting in the middle and working outwards. F980A051 7 8 9

2. 2 12 801 970 Saab 9-3 M03- 1 Spoiler 2 Screw with washer (x5) 3 Clip nut (x2) 4 Clips F980A049 3 1 2 4

3. 12 801 970 3 Saab 9-3 M03- The spoiler has been treated with grey primer and is ready for painting. 1 Paint the spoiler the same colour as the body. Refer to “Instructions for painting primed PP/EPDM plastic” in this document. 2 Raise the car. 3 Remove the spoiler shield, unplug the bumper connector and remove it from the holder on the spoiler shield. Cars with headlamp washers: Unhook the hose from the spoiler shield. 4 Remove the screws from the spoiler, one by each wheel housing and three from below. 5 Prise off the fasteners holding the spoiler wiring harness by pressing them forward. 6 Pull off the bottom portion of the bumper. F980A050 4 3 3 3 5 5 5 5 5 4 6 3

1. Saab 9-3 M03- 900 Installation instructions SCdefault MONTERINGSANVISNING · INSTALLATION INSTRUCTIONS MONTAGEANLEITUNG · INSTRUCTIONS DE MONTAGE SITdefault Saab 9-3 M03- Front spoiler Accessories Part No. Group Date Instruction Part No. Replaces 12 801 650 12 805 376 9:84-25 Sep 03 12 801 970 12 801 970 Dec 02 F980A048

5. 12 801 970 5 Saab 9-3 M03- 10 Check the alignment of the rear edges of the spoiler and the wheel housings. 11 Fit the screws to secure spoiler. 12 Fit the clip onto the spoiler guide tab. 13 Lift up the spoiler shield, fit the bumper connec- tor into the holder and plug in the connector. Cars with headlamp washers: Hook the hose to the spoiler shield. All: Fit the spoiler shield. 14 Lower the car. 15 Cars with headlamp washers: Check the func- tion of the headlamp washers. F980A236 10 11 11 11 12 12 13

6. 6 12 801 970 Saab 9-3 M03- Directions for painting preprimed PP/EPDM plastic • The spoiler must be placed where it will not be deformed while painting. • The temperature must not exceed +40 °C (104 °F). • The spoiler is pre-primed on delivery • Use clean gloves when handling the spoiler Drying times 70 minutes at 40°C (104°F). Preparations • Smooth off the primed surface thoroughly. Use abrasive paper 3M 1200 or 800.

Weergaven

  • 531 Totale weergaven
  • 445 Websiteweergaven
  • 86 Ingesloten weergaven

Acties

  • 0 Gedeeld op sociale media
  • 0 Vind-ik-leuks
  • 0 Vind-ik-niet-leuks
  • 0 Opmerkingen

Aantal malen gedeeld

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Insluitingen 4

  • 3 saabpartners.com
  • 5 www.saabpartners.com
  • 3 52.29.207.161
  • 4 54.154.214.138