Montage-instructies bike holder

English

Delen op sociale netwerken

Koppeling delen

Gebruik permanente koppeling om te delen via sociale media

Deel met een vriend

Alstublieft in te loggen voor het versturen van deze document per e-mail!

In uw website insluiten

Kies de startpagina

10. 10 32 025 795 F980A468 45 43 44 ABC 1x 1x

5. 32 025 795 5 F980A458 9 10 11 ca.25cm/10in ca. 1cm /0.4in 9Nm (6.5lb/ft) F980A459 12 13 14 15 A B

6. 6 32 025 795 F980A460 16 17 18 19 A B C CLICK F980A461 ca.5cm/2in A B 21 22 23 20

7. 32 025 795 7 F980A462 4-6 Nm (3-4.5 Ib/ft) A B 25 24 26 F980A463 28A 28B 27

2. 2 32 025 795 F980A454 x2 x1 x2 x1 x1 x4 x1 x1 x1 F980A455 x4 x4 x4 x2 x2 x8 x2 x2 x2 x8

8. 8 32 025 795 CLICK F980A464 29 30 31 32 ca.3mm/0.1in F980A465 34 33 35 36 Max. 120 kmh Max. 75 mph

9. 32 025 795 9 CLICK F980A466 38 37 CLICK F980A467 42 40 39 41 A B B A 41 24 39 B A C D

4. 4 32 025 795 CLICK F980A456 12 34 A A B B CLICK F980A457 56 A 78 B 180 ̊ 9-11Nm (6.5-8lb/ft)

1. Installation instructions SCdefault MONTERINGSANVISNING · INSTALLATION INSTRUCTIONS MONTAGEANLEITUNG · INSTRUCTIONS DE MONTAGE SITdefault Bike holder with lifting arm Accessories Part No. Date Instruction Part No. Replaces 32 025 796 Nov 05 32 025 795 F980A453

3. 32 025 795 3 Important · The bike holder is constructed for safe transport provided that it has been properly mounted and is facing in the correct direction. Product modi- fications must not be made . · Maximum permitted roof load (including load car- riers): See the Owner's Manual for the car and information relating to the load carriers. Bike holder weight: 6.8 kg (15 lb). · Make sure all fasteners are secured before driv- ing off. Stop after a short distance and check that all the fasteners are secure. · Pay particular attention to the height of the vehi- cle with the bike holder fitted. · For reasons of traffic safety and to reduce wind resistance, the holder should be removed when not in use. Remove the holder and bar from the lever and store it in the car's luggage compart- ment. · The load carriers should be removed before the car is taken through an automatic car wash. · These installation instructions should be stored in the car. · The holder must only be used for transporting bicycles. · Note that the car's handling characteristics (under high side-winds, cornering or braking) will change when driving with the holder loaded. · The holder has two locking positions (raised/low- ered). A “click“ sound confirms that the correct position has been engaged. · General Motors (GM) is not responsible for any damage caused by incorrectly fitted load carriers or accessories. · In the event of uncertainty, contact your nearest dealer. Advice and tips · Conduct regular maintenance on the holder, including keeping it free from dirt and salt and lubricating the locks. · Check that wires and cables are not damaged during tensioning. WARNING Read the installation instructions carefully before using the bike holder. Follow these instructions carefully when fitting the bike holder. Adapt the speed of the car to take into account the change in centre of gravity and aerodynamics caused by the weight and profile of the roof load. Remove any parts that can come loose from the bike, child seat and saddlebags for example, before placing the bike on the roof of the car. The mountings must be fitted around the rail and not around its extension pieces. Position the mountings so that the protrusion is approx. 25 cm (10 in). When the bike holder bar is to be raised with no bike attached, the bar will raise with excessive force since the tension in the spring corresponds to the weight of the bike. This poses a risk for per- sonal injury.

Weergaven

  • 567 Totale weergaven
  • 487 Websiteweergaven
  • 80 Ingesloten weergaven

Acties

  • 0 Gedeeld op sociale media
  • 0 Vind-ik-leuks
  • 0 Vind-ik-niet-leuks
  • 0 Opmerkingen

Aantal malen gedeeld

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Insluitingen 4

  • 7 www.saabpartners.com
  • 3 saabpartners.com
  • 1 52.29.207.161
  • 4 54.154.214.138