Pedal raising kit 9-3 4

English

Delen op sociale netwerken

Koppeling delen

Gebruik permanente koppeling om te delen via sociale media

Deel met een vriend

Alstublieft in te loggen voor het versturen van deze document per e-mail!

In uw website insluiten

Kies de startpagina

1. Saab 9-3 M03- 900 Installation instructions SCdefault MONTERINGSANVISNING · INSTALLATION INSTRUCTIONS MONTAGEANLEITUNG · INSTRUCTIONS DE MONTAGE SITdefault Saab 9-3 M03- Pedal raising kit Accessories Part No. Group Date Instruction Part No. Replaces 12 787 136 12 787 137 12 791 272 12 791 273 9:52-02 Mar 02 12 788 447 F980A014

2. 2 12 788 447 Saab 9-3 M03- 1 Remove the pedal pads from all the pedals Accelerator pedal RHD: Remove the entire pedal plate by releasing the clip and unhooking the pedal plate. 2 Cut out the templates and affix them to the ped- als, e.g. with adhesive tape. 3 Mark the position of the holes on the pedal plates and drill at right angles to each pedal plate. Drill a 3.5 mm hole first and then 7 mm. Deburr the holes. 4 Remove the templates and screw on the pedal raising plates with lock nuts and bolts. The bolts must be inserted from above with the nuts underneath the pedal. Clutch pedal RHD: The bottom right bolts (see arrow) must be fitted from below. Accelerator pedal RHD: Fit the accelerator pedal by hooking on the bottom edge and then screwing on the clip. Tightening torque 9.5 Nm (7 lbf ft) 5 Fit all pedal pads. 6 Vacuum the area around and under the pedals. F980A015

Weergaven

  • 480 Totale weergaven
  • 404 Websiteweergaven
  • 76 Ingesloten weergaven

Acties

  • 0 Gedeeld op sociale media
  • 0 Vind-ik-leuks
  • 0 Vind-ik-niet-leuks
  • 0 Opmerkingen

Aantal malen gedeeld

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Insluitingen 4

  • 11 www.saabpartners.com
  • 3 52.29.207.161
  • 1 saabpartners.com
  • 4 54.154.214.138