Sill covers 900 3D/CV, 9-3 3D/CV

English

Delen op sociale netwerken

Koppeling delen

Gebruik permanente koppeling om te delen via sociale media

Deel met een vriend

Alstublieft in te loggen voor het versturen van deze document per e-mail!

In uw website insluiten

Kies de startpagina

3. 47 86 471 3 Saab 900 3D M94-/CV M95-, Saab 9-3 3D/CV 6 Position the new sill cover (1 section) over the weld screws. 7 Fit the clip to the front of the sill cover. 8 Screw on the plastic nuts securing the sill cover. 9 Wash the mudflap and locate the marking on the back. If there is no marking, use the dimensions shown in the illustration. Drill a 6 mm hole at the marking on the mudflap. 10 Fit the mudflap to the wheel housing and the attachment on the sill cover using the new hole. 11 Fit the sill strip with the plugged section facing the rear and the rubber strip upwards. D980A308 11 7 9 8 8 8 6 10 61,5mm 133mm

2. 2 47 86 471 Saab 900 3D M94-/CV M95-, Saab 9-3 3D/CV The installation instructions describe fitting on the left-hand side of the car. Repeat the procedure on the right-hand side. The sill covers are surfaced with black primer and are suitable for painting. 1 Paint the sill covers to match the body colour. See “Painting directions“ in these installation instructions. 2 Remove the mudflap. 3 Remove the sill strip, being careful not to distort the metal rail in the strip. 4 Unscrew the plastic nuts securing the sill scuff plates. 5 Remove the clip on the front of the sill protector and remove the sill protector (2-pieces) from the weld screws starting with the front sill protector. D980A095 3 4 5 4 4 2

1. Saab 900 3D M94-/CV M95-, Saab 9-3 3D/CV 9-3 Monteringsanvisning SCdefault MONTERINGSANVISNING · INSTALLATION INSTRUCTIONS MONTAGEANLEITUNG · INSTALLATIONS DE MONTAGE SITdefault Saab 900 3D M94-/CV M95-, Saab 9-3 3D/CV Sill covers 1 Sill cover, RH (1 pc.) 2 Sill cover, LH (1 pc.) 3 Plastic nut (14 pcs.) 4 Screw (2 pcs.) Accessories Part No. Group Date Instruction Part No. Replaces 400 109 005 9:84-06 Jun 00 47 86 471 47 86 471 Sep 98 D980A307 2 1 3 4

4. 4 47 86 471 Saab 900 3D M94-/CV M95-, Saab 9-3 3D/CV Painting directions for primed PUR-RIM plastic • Place the sill covers in such a way, as they will not be distorted while painting. • The temperature must not exceed +40°C (104°F). • The sill covers are primed on delivery. • Use clean gloves when handling the sill covers. Drying time 70 minutes at 40°C (104°F) Preparation • For best results, apply pore filler first. • Sand the primed surfaces thoroughly. Use 3M 1200 or 800 abrasive paper.

Weergaven

  • 714 Totale weergaven
  • 580 Websiteweergaven
  • 134 Ingesloten weergaven

Acties

  • 0 Gedeeld op sociale media
  • 0 Vind-ik-leuks
  • 0 Vind-ik-niet-leuks
  • 0 Opmerkingen

Aantal malen gedeeld

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Insluitingen 4

  • 12 www.saabpartners.com
  • 15 saabpartners.com
  • 2 52.29.207.161
  • 5 54.154.214.138