2. 2 12 798 935 Saab 9-3 M03- 1 Raise the car. 2 Mark the bottom of the exhaust pipe 100 mm from the silencer. 3 Cut the exhaust pipe at right angles and remove the rear silencer. 4 Clean all burrs and dirt from the cut section and the sealing surface. 5 Make a recess in the bumper according to the accessory description “Cover, sport silencer”. 6 Fit the new silencer and adjust it so that it hangs evenly. 7 Check the tailpipe; it should be positioned hori- zontally in the centre of the removed section in the bumper and should follow the bumper profile. 8 Fit the clips. Tightening torque: 40 Nm (30 lbf ft) 9 Check the tailpipe; it should be positioned hori- zontally in the centre of the removed section in the bumper and should follow the bumper profile. Adjust if necessary. 10 Lower the car. 11 Connect an exhaust hose and start the engine. Check that the joint is sealed. F920A002 100mm 5 7 8

1. Saab 9-3 M03- 900 Installation instructions SCdefault MONTERINGSANVISNING · INSTALLATION INSTRUCTIONS MONTAGEANLEITUNG · INSTRUCTIONS DE MONTAGE SITdefault Saab 9-3 M03- Sport exhaust system Accessories Part No. Group Date Instruction Part No. Replaces 12 787 164 12 798 936 12 798 937 9:25-01 Jan 03 12 798 935 12 798 935 Aug 02 F920A001