2. 2 12 800 219 Saab 9-3 M03- 1 Cover 2 Screw (x2) 3 Nut (x2) F980A176 3 2 1
3. 12 800 219 3 Saab 9-3 M03- The cover can be painted with the same colour as the car, see “Directions for painting PC/PBT plas- tics“ in this installation instruction. 1 Raise the car and remove the rear silencer according to the description in the sport exhaust system installation instructions. 2 Using a reciprocating saw, make a recess in the lower section of the bumper as indicated with the shaded area (a universal knife with hooked blade can also be used). 3 Align the cover and drill two 5 mm holes using the cover as a template. 4 Fit the cover using screws and nuts. 5 Lower the car. WARNING Exercise caution when using a saw or knife as this may cause injury. Important Cut or saw as precisely as possible. Adjust if nec- essary using a file. F980A179
1. Saab 9-3 M03- 900 Installation instructions SCdefault MONTERINGSANVISNING · INSTALLATION INSTRUCTIONS MONTAGEANLEITUNG · INSTRUCTIONS DE MONTAGE SITdefault Saab 9-3 M03- Sport silencer cover Accessories Part No. Group Date Instruction Part No. Replaces 12 793 160 9:84-24 Aug 02 12 800 219 F980A175
4. 4 12 800 219 Saab 9-3 M03- Directions for painting PC/PBT plastics Place the cover so that it is not deformed during the painting process. The temperature must not exceed +40°C (104°F). Use clean gloves when handling the cover. Drying time 70 minutes at 40°C (104°F). Preparations Grind the surfaces thoroughly. Use abrasive paper 3M 1200 or 800. Clean the surfaces to be painted. Use an appro- priate cleaning agent, e.g. Teroson FL (part no. 16-30 15 815). Apply an appropriate primer.
Weergaven
-
1143
Totale weergaven
-
994
Websiteweergaven
-
149
Ingesloten weergaven
Acties
-
0
Gedeeld op sociale media
-
0
Vind-ik-leuks
-
0
Vind-ik-niet-leuks
-
0
Opmerkingen
Aantal malen gedeeld
-
0
Facebook
-
Twitter
-
0
LinkedIn
-
0
Google+
Insluitingen
4
-
3
saabpartners.com
-
14
www.saabpartners.com
-
2
52.29.207.161
-
9
54.154.214.138