Wind deflector 9-3 CV

English

Delen op sociale netwerken

Koppeling delen

Gebruik permanente koppeling om te delen via sociale media

Deel met een vriend

Alstublieft in te loggen voor het versturen van deze document per e-mail!

In uw website insluiten

Kies de startpagina

5. 12 833 880 5 Saab 9-3 CV M04- To remove 1 Fold down the wind deflector's top frame. 2 Pull up the rear head restraints to the top posi- tion. 3 Fold in one wind deflector stay by pulling it out and then turning it. Use the screw as a thumb rest when turning in order to release the stay from the locked position. 4 Pull the wind deflector forward from the rear seat head restraints, unhook the other stay and lift the wind deflector from the car. 5 Fold in the other stay by pulling it out and turning it in the same way as the first stay. F980A342 5 1 4 3 2 2

3. 12 833 880 3 Saab 9-3 CV M04- Fitting 1 Pull up the rear head restraints to the top posi- tion. 2 Fold the front seat backrests forward and move the seats to their front positions. 3 Take the wind deflector out from the storage bag. 4 Fold out the top and bottom frames of the wind deflector. 5 Press in the pin towards the spring and push the frame's top and bottom sections together. 6 Carefully release the pin so that it enters the hole. Check that the frame sections are held together. Important The top and bottom frames are folded out in their separate directions. F980A340 5 6 4 4 5

1. Saab 9-3 CV M04- 900 Installation instructions SCdefault MONTERINGSANVISNING · INSTALLATION INSTRUCTIONS MONTAGEANLEITUNG · INSTRUCTIONS DE MONTAGE SITdefault Saab 9-3 CV M04- Wind deflector Accessories Part No. Group Date Instruction Part No. Replaces 12 831 370 32 026 001 9:84-26 Feb 07 12 833 880 12 833 880 Jun 04 F980A338

2. 2 12 833 880 Saab 9-3 CV M04- 1Bag 2 Wind deflector Fitting , see page 3 To remove , see page 5 To clean , see page 6 F980A339 2 1

4. 4 12 833 880 Saab 9-3 CV M04- 7 Fold out one stay by pulling it out and then turn- ing it. Use the screw as a thumb rest when turn- ing in order to release the stay from the locked position. 8 Fit the unfolded stay in the side trim hole and slide the rear holder of the wind deflector in to the rear seat backrest. 9 Fold out the other stay by pulling it out and then turning and fitting it into the side trim hole in the same way as the first one. 10 Check that the stays are properly engaged in the side trims and that they are locked in posi- tion. 11 Check that there is no play in the front side trim attachment points for the wind deflector. Adjust if necessary with the two screws in the ends of the stays. 12 Press down both of the rear head restraints to their bottom position. 13 Fold up the top frame so that it engages in the end position. Move the front seats to the correct position. Important The head restraints must be in the bottom position when the wind deflector is used as the head restraints secure the wind deflector rear attach- ments. F980A341 7 8 13 9 12 12 11 7 8 8 Important Do not adjust the front seat backrests backward so far that they are in contact with the wind deflec- tor.

6. 6 12 833 880 Saab 9-3 CV M04- 6 Press in the pin towards the spring and push the frame's top and bottom sections together. 7 Fold the top and bottom frames of the wind deflector together. 8 Guide the wind deflector into the storage bag. To clean Use a linen cloth and a soap solution. Press careful- ly on the perforated plastic wrap. Important Always store the wind deflector in the bag when it is not in use. Important Never use benzine or other solvents. F980A343 7 7 6 6

Weergaven

  • 624 Totale weergaven
  • 512 Websiteweergaven
  • 112 Ingesloten weergaven

Acties

  • 0 Gedeeld op sociale media
  • 0 Vind-ik-leuks
  • 0 Vind-ik-niet-leuks
  • 0 Opmerkingen

Aantal malen gedeeld

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Insluitingen 4

  • 19 www.saabpartners.com
  • 3 52.29.207.161
  • 7 saabpartners.com
  • 5 54.154.214.138