3. 86 90 612 3 Saab 9-3 5 Cutthemiddlecabletiearoundthewiringhar- ness in the cable duct. 6 Lift up the floor mat and localise the 2-pin con- nector, remove the connector from its bracket. 7 Plug the 2-pin connector for the CD-changer harness into the connector in the car. Secure the connector. 8 Replace the cut cable ties with new ones around the wiring harness in the cable duct. 9 Plug in the 6-pin connector for the CD-changer to the connector in the car. It is located above the console for the connectors. D930A603

4. 4 8690612 Saab 9-3 10 Lay out the wiring harness for the CD-changer in the cable duct and pull it rearwards to the lug- gage compartment, follow the cable duct. 11 Fixate the CD-changer cable to the cable duct and secure with a cable tie. 12 Connect the CD-changer ground lead. 13 Refit removed parts. D930A604

2. 2 8690612 Saab 9-3 1 Open the boot lid, loosen and fold out the rear left side upholstery in the luggage compartment. 2 Remove the left side upholstery under the rear window on the 3-door cars. 3 Remove the left front and rear scuff plate and the B-pillar upholstery. 4 Remove the lower panel. Remove the glove box on a RHD car. D930A605 2 2 2

1. Saab 9-3 9-3 Monteringsanvisning SCdefault MONTERINGSANVISNING · INSTALLATION INSTRUCTIONS MONTAGEANLEITUNG · INSTALLATIONS DE MONTAGE SITdefault Saab 9-3 Wiring harness, CD-changer 1 Wiring harness 2 Cable ties (8 pcs.) Accessories Part No. Group Date Instruction Part No. Replaces 400 111 738 9:36-11 Jun 98 86 90 612 86 90 612 May 98 D930A606